Key turns but bolt barely moves
The cylinder or the strike alignment is usually to blame. We test the bolt with the door open, then closed, to separate a lock fault from a door fault.
A lock that sticks, spins or only works if you lift the door is telling you something. We find the cause before we touch the hardware.
Locks rarely fail for one reason. A key that sticks may be worn, the cylinder may be gummed with grime, or the door may have sagged so the latch no longer meets the strike. We check each of these in turn, repair what is serviceable and say plainly when a part is worn out. Loose handles, broken springs and stiff thumb turns are all common repair jobs. If a lock is badly worn or obsolete, replacing it can be the more dependable choice.
Richmond's damp climate swells wooden doors through the wet months, and the same door can shut easily in summer and bind in winter. That happens on older houses in Broadmoor and Shellmont, where frames have settled over decades. Steveston's waterfront air can also tarnish and stiffen exposed hardware. Condo doors in City Centre have different faults, usually worn lever handles from heavy daily use and closers that have drifted out of adjustment.
A sagging door or loose hinge screws can make the latch miss the strike plate. A worn key or cylinder is another common cause of a lock that sticks.
Typical reasons people in Richmond call about residential lock repair.
The cylinder or the strike alignment is usually to blame. We test the bolt with the door open, then closed, to separate a lock fault from a door fault.
A lever that wobbles after years of use is usually a loose spindle or mounting screws. These are tightened or replaced, and the latch is checked for smooth action.
A few details that make the first call quicker and the visit more accurate.
The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Richmond and the nearby areas below. Call with the address and we will tell you when someone can be there.
Wood absorbs moisture and swells, so the door presses on the frame and the latch no longer lines up with the strike. The lock may be fine. We check the alignment and adjust or reposition parts before suggesting replacement.
If it is sound and parts are available, yes. A repair is not worthwhile when the cylinder is badly worn, parts are obsolete, or the lock no longer gives the security you need. We tell you which situation you are in.
Guides that go deeper on this kind of job.
Call with the address or send the details online. The phone is answered 24/7.