A handle that spins freely
The interior lever on a Walnut Grove front door has come loose and no longer pulls the latch. If the internals have failed, a matching replacement set is faster than chasing parts.
When a lock has failed, worn out or no longer suits the door, we assess the opening and fit hardware that matches, reusing existing holes where we can.
Not every tired lock needs replacing, and not every failed lock can be saved. The decision rests on the door, the frame, how the lock is used and what you want it to do. Standard doors take a 2-1/8 inch cross bore and a 1 inch edge bore, which lets most modern locksets drop into existing holes. Older doors sometimes need more care.
Walnut Grove, Murrayville and Brookswood have houses from several decades, so a visit can turn up three generations of hardware on a single home: a brass knob on the back door, a different brand of deadbolt at the front, and a patio handle that no longer latches. Matching finishes and keying across all of them is a common request when owners decide to replace in one visit.
Willoughby and Yorkson homes tend to have standard door preparation, so swapping a lockset is usually quick. Fort Langley Village is different: heritage-style buildings and older doors may use mortise hardware or unusual backsets, and the right fit comes from measuring, not guessing. On acreages near Campbell Valley, weather-exposed doors in outbuildings may need hardware with a tougher finish.
Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.
Typical reasons people in Langley call about residential lock installation and replacement.
The interior lever on a Walnut Grove front door has come loose and no longer pulls the latch. If the internals have failed, a matching replacement set is faster than chasing parts.
A Brookswood home has three different entry locks and three different keys. Replacing them with one matched set, or keying them alike, cleans up the arrangement.
The door may predate standard bores. We measure the backset and the preparation first, then choose hardware that fits instead of cutting new holes unnecessarily.
A few details that make the first call quicker and the visit more accurate.
The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Langley and the nearby areas below. Call with the address and we will tell you when someone can be there.
No. You can bring your own if you already have one, but we can also supply and fit compatible hardware, which avoids the risk of buying something that does not fit your door. Photos and measurements help us come prepared.
Often it can, if the preparation matches or the door can be adapted without weakening it. Some older doors have mortise hardware that is better rebuilt or replaced like for like. We measure first and tell you the options.
Only when the lock is worn, damaged or does not suit what you need. If the hardware works well and you only want new keys, rekeying is simpler. We will say which applies to each door once we have looked at it.
Guides that go deeper on this kind of job.
Call with the address or send the details online. The phone is answered 24/7.