Skip to content
The Lock Doc

Residential Lock Installation and Replacement in Coquitlam, BC

A cracked lever, a lock that has failed or a new door that needs hardware: we fit the right lockset and make sure it works smoothly before we go.

Request service

For immediate help, call +1 236 800 LOCK. Submitting this form does not confirm an appointment.

New locks for Coquitlam front and side doors

Replacement is the right choice when hardware is worn out, damaged, mismatched or too weak for the door. Most residential doors use a standard 2-1/8 inch cross bore and a 1 inch edge bore, with a backset of 2-3/8 or 2-3/4 inches, so a new lockset normally fits the existing holes. We check those measurements and the door's condition before fitting anything.

Older houses in Maillardville and Austin Heights sometimes have worn knobsets or a mix of lockset styles on different doors. Renovated entries in Eagle Ridge often need hardware chosen to match new doors. In Burke Mountain townhomes, a strata may set a standard finish for exterior hardware, so confirm the rules before choosing a lock. Constant damp through the wet months can also wear exterior finishes faster, so durable hardware matters.

Face and edge views of a door showing the cross bore, backset, edge bore and door thickness.
Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.

How residential lock installation and replacement works

Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.

Common situations in Coquitlam

Typical reasons people in Coquitlam call about residential lock installation and replacement.

A lock that has simply worn out

A front door in Mundy Park's neighbourhood has a lever that sags and a key that barely turns. Replacing the whole lockset is usually better than repairing a tired one.

A renovated entry door

A homeowner in Westwood Plateau fits a new door and needs matching handle and deadbolt hardware. Bores and backset are checked before anything is installed.

Before you call

A few details that make the first call quicker and the visit more accurate.

  1. Measure or photograph the door edge and the existing lockset so we can bring compatible hardware.
  2. Decide whether you want one key for several doors.
  3. Check strata rules for exterior finish or smart hardware before choosing a style.

Where we work in Coquitlam

The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Coquitlam and the nearby areas below. Call with the address and we will tell you when someone can be there.

Map of Coquitlam neighbourhoods served: City Centre, Burquitlam, Maillardville, Austin Heights, Westwood Plateau, Burke Mountain, Eagle Ridge, Mundy Park
Neighbourhoods across Coquitlam and the nearby areas we also cover: Port Coquitlam, Port Moody, Burnaby, New Westminster. Locations are approximate.

Residential Lock Installation and Replacement questions in Coquitlam

Do I need to buy the lock myself first?

Not necessarily. A technician can bring common hardware to the visit and fit it on the spot. If you have already bought something, tell us the type, so we can check it matches your door before starting.

What happens to the old hardware?

It is removed and taken away unless you ask to keep it. If the old lock was in working order and you only wanted new keys, rekeying is often the better option, so we mention that before replacing anything.

Need a locksmith in Coquitlam?

Call with the address or send the details online. The phone is answered 24/7.