A staff member leaves with keys
When a Kingsway shop loses an employee who held a key, rekeying the front and back doors cuts off old copies without replacing sound hardware. The owner then carries one fresh set.
Staff turnover at a Kingsway storefront, or a new tenant in a Brentwood office tower? We look at your doors on site, then recommend hardware that suits how the space is used.
Commercial locksmith work here covers very different buildings: retail strips along Kingsway and Hastings Street, office floors near Brentwood Town Centre and Metrotown, light industrial units around Big Bend and Production Way, and strata lobbies close to the SkyTrain lines. Each has its own doors, traffic and key holders. We start with an on-site look at the opening, then suggest rekeying, new hardware, master keying or electronic access to match.
Shops and service businesses on Kingsway and Hastings Street often have aluminum storefront doors with narrow stiles, where only slim hardware will fit. Offices in the towers near Brentwood and Lougheed tend to use cylindrical locks on suite doors, while the landlord or property manager controls the building core. Knowing who approves changes before we arrive saves a second visit.
Industrial and warehouse units around Big Bend, Still Creek and Marine Way see heavy daily use on rear and loading doors, so wear shows up there first. Commercial units inside strata buildings near Metrotown add a further layer, because the strata council may need to sign off on keying. The technician brings common hardware and tests each door before leaving.
A commercial door is a set of parts that work together: the closer, hinges, lock, strike, exit device and reader all have to line up and suit the traffic.
Typical reasons people in Burnaby call about commercial locksmith service.
When a Kingsway shop loses an employee who held a key, rekeying the front and back doors cuts off old copies without replacing sound hardware. The owner then carries one fresh set.
A business moving into an office near Brentwood Town Centre often inherits keys nobody can account for. Suite doors can be rekeyed, and shared storage or utility doors keyed to a plan.
A unit near Production Way has a back door opened constantly through the day. Latches loosen and closers drift, so the whole opening is checked before any parts are chosen.
A few details that make the first call quicker and the visit more accurate.
The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Burnaby and the nearby areas below. Call with the address and we will tell you when someone can be there.
Yes, where the person responsible for the suite or building approves the work. Building-standard cylinders in the lobby or core are usually controlled by the landlord, so we confirm who owns each door before changing anything.
Often it can. The technician rekeys compatible cylinders, looks at latches, closers and frames while on site, and lists anything worn. Parts that are not on the van may need a follow-up visit.
Personnel doors beside loading bays are common work for us, including locks, latches and exit hardware. Overhead and roll-up doors are a separate trade, so we focus on the lock and handle side of the opening.
Guides that go deeper on this kind of job.
Call with the address or send the details online. The phone is answered 24/7.