Skip to content
The Lock Doc

Residential Lock Installation and Replacement in Vancouver, BC

New doors, worn hardware or a lock that fails: we assess the opening and fit the right lockset, from Oakridge family homes to older doors in Shaughnessy.

Request service

For immediate help, call +1 236 800 LOCK. Submitting this form does not confirm an appointment.

Replacing home locks in Vancouver's older houses

Replacing a lockset only makes sense when repair or rekeying will not do the job. When it does, the work starts with the door: its thickness, the bore holes, the backset and the frame. Standard prep is a 2-1/8 inch cross bore with a 1 inch edge bore, and we reuse existing holes where we can so the door is not cut more than needed.

Houses in Shaughnessy and older parts of Fairview can have heritage doors with mortise locks, decorative plates or unusual backsets. Those are worth keeping where they work. We look at the mortise, the strike and the finish before suggesting a swap, and we tell you if matching the original look limits your options.

Oakridge, Marpole and South Cambie have many postwar and newer houses with standard bored doors, which makes replacement simple. The harder question is usually what to buy: grade of hardware, finish that survives wet winters, a keypad or key only, and whether several doors should share one key. We help you compare before anything is installed.

Face and edge views of a door showing the cross bore, backset, edge bore and door thickness.
Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.

How residential lock installation and replacement works

Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.

Common situations in Vancouver

Typical reasons people in Vancouver call about residential lock installation and replacement.

A lever that has gone loose

In a Fairview rental, the front lever wobbles and the latch sticks. If the spindle and latch are worn out, a replacement lockset on the existing holes is quicker than a repair.

Updating a tired heritage door

A Shaughnessy owner wants better security without ruining an original door. We measure the mortise and look for a compatible modern replacement or a solid upgrade to the existing lock.

Matching keys across new locks

An Oakridge family replaces front, back and garage entry locks and wants one key. Compatible cylinders can be keyed alike, and any that cannot be matched are flagged.

Before you call

A few details that make the first call quicker and the visit more accurate.

  1. Count the doors to be changed and note which ones are exterior, interior or part of a suite.
  2. Photograph the existing lock on both sides and the door edge, including any visible plate.
  3. If you have already bought hardware, keep the box so we can check it fits your door.
  4. Say how many keys you want and whether any locks should be keyed alike.

Where we work in Vancouver

The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Vancouver and the nearby areas below. Call with the address and we will tell you when someone can be there.

Map of Vancouver neighbourhoods served: Downtown, West End, Yaletown, Kitsilano, Mount Pleasant, Riley Park, Grandview-Woodland, Kerrisdale
Neighbourhoods across Vancouver and the nearby areas we also cover: Burnaby, Richmond, North Vancouver, West Vancouver. Locations are approximate.

Residential Lock Installation and Replacement questions in Vancouver

Do I need to replace my lock or can it be repaired?

Not always. Sticking keys, loose handles and misaligned latches can often be repaired, and a lost key may only need rekeying. Replacement makes sense when hardware is badly worn, damaged or obsolete, and we explain why before changing it.

Can you replace locks on an older Shaughnessy or Fairview door?

Often, yes. Older doors may have mortise locks or non-standard holes, so we check the door before choosing hardware. In some cases it is better to service the existing mortise lock than to cut a new opening.

What can I do to prepare for a lock replacement?

Clear access to each door, find any keys you still have and decide how many doors should match. If you have bought a lockset, tell us the type so we can confirm it fits the door's bore and backset.

Need a locksmith in Vancouver?

Call with the address or send the details online. The phone is answered 24/7.