The key turns but the bolt barely moves
A deadbolt on a Burnaby Heights house has become stiff. The technician checks for grit, a worn key and a bent bolt, and fixes or replaces only what has failed.
A key that sticks, a latch that no longer catches or a handle that wobbles can often be fixed on site. The technician diagnoses the lock before suggesting anything bigger.
Most locks wear out in predictable ways. Keys get thin, cylinders collect grit, strikes drift out of line and handles loosen on their screws. A repair visit starts with working out which part has failed and whether the fix will last. If a lock is badly worn or obsolete, it is better to say so and replace it than to patch it again.
Burnaby's wet months are hard on wooden doors. When a door swells, the latch can stop meeting the strike, and you end up lifting or shoulder-pushing the door to make it lock. Adjusting or repositioning the strike often brings it back without touching the lock, a common fix for houses around Capitol Hill and the South Slope.
In older towers and low-rise buildings near Metrotown and Edmonds, the lock on a suite door may have been turned many times over the years. A sticking key is often a worn key or a dirty cylinder, and a fresh copy cut from the original or a cleaned cylinder can solve it. Loose lever handles on newer suites are usually a quick tighten or a replaced spring.
A sagging door or loose hinge screws can make the latch miss the strike plate. A worn key or cylinder is another common cause of a lock that sticks.
Typical reasons people in Burnaby call about residential lock repair.
A deadbolt on a Burnaby Heights house has become stiff. The technician checks for grit, a worn key and a bent bolt, and fixes or replaces only what has failed.
A hillside house on Capitol Hill has a door that sagged on its hinges, so the bolt misses the strike. Hinge screws and the strike are corrected so the lock works normally.
The lever on a condo entry droops and the latch does not always retract. A tightened screw or a replaced spring cassette can bring it back without new hardware.
A few details that make the first call quicker and the visit more accurate.
The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Burnaby and the nearby areas below. Call with the address and we will tell you when someone can be there.
Yes. A thin or bent key can drag on the pins and wear the cylinder faster. A fresh key cut from the original code often fixes both the key and the problem, though a badly worn cylinder may still need replacing.
Wood absorbs moisture in the rainy months and swells, which pushes the latch or bolt out of line with the strike. Adjusting the strike or easing the door edge often helps without any change to the lock.
When parts are obsolete, the cylinder is badly worn or the lock keeps failing, new hardware is safer and often more dependable. The technician diagnoses first and explains which choice suits the door before any work starts.
Guides that go deeper on this kind of job.
Call with the address or send the details online. The phone is answered 24/7.