Skip to content
The Lock Doc

Residential Lock Installation and Replacement in West Vancouver, BC

A worn lockset, a new front door or a change of style? We check the opening, fit compatible residential hardware and test it before we leave.

Request service

For immediate help, call +1 236 800 LOCK. Submitting this form does not confirm an appointment.

Fitting new locks on West Vancouver homes

Most residential doors use a standard 2-1/8 inch cross bore and a 1 inch edge bore, with a backset of either 2-3/8 or 2-3/4 inches. When those match, a new lock can use the existing holes. Older houses sometimes have mortise locks or unusual prep, and the technician measures before suggesting what will fit.

Ambleside and Dundarave have older apartments and character houses where original hardware may be decades old and worn out. In the British Properties and Altamont, larger entry doors, sidelights and double doors can need different sets of locks on each leaf. Salt air near the water speeds up finish wear, so exterior locks there are worth checking for corrosion.

Face and edge views of a door showing the cross bore, backset, edge bore and door thickness.
Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.

How residential lock installation and replacement works

Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.

Common situations in West Vancouver

Typical reasons people in West Vancouver call about residential lock installation and replacement.

A new front door arrives

A renovation in Altamont adds a new entry door. The locks are matched to the prep and aligned so the bolt meets a reinforced strike.

A tired lockset that keeps failing

A lever on an Ambleside condo door has gone loose and the key is stiff. If repair is not worthwhile, a replacement is fitted and keyed to your existing set.

Before you call

A few details that make the first call quicker and the visit more accurate.

  1. Measure or photograph the existing lock, including the faceplate and the holes in the door edge.
  2. Decide whether you want a matching key across all doors or separate keys for some.
  3. Check strata or landlord rules if you plan to change the look of a unit entry.

Where we work in West Vancouver

The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in West Vancouver and the nearby areas below. Call with the address and we will tell you when someone can be there.

Map of West Vancouver neighbourhoods served: Ambleside, Dundarave, Park Royal, British Properties, Altamont, Caulfeild, Whytecliff, Horseshoe Bay
Neighbourhoods across West Vancouver and the nearby areas we also cover: North Vancouver, Vancouver, Burnaby, Richmond. Locations are approximate.

Residential Lock Installation and Replacement questions in West Vancouver

Can I keep my existing keys when I replace a lock?

Often yes, if the new lock is keyed to match your existing keys or the other locks on the property. The technician can set several new locks to one key. It depends on the keyway and the hardware you choose.

Will a new lock fit my older West Vancouver door?

Usually, when it uses standard prep. Some older doors in Dundarave and Ambleside have mortise pockets or oversized holes that call for particular hardware. A quick check at the door tells us what will fit before any part is ordered.

Need a locksmith in West Vancouver?

Call with the address or send the details online. The phone is answered 24/7.