A cafe door that catches and sticks
A Commercial Drive cafe's entry lock jams during the morning rush. Wear in a light-duty lock is common on busy doors, and a heavier-duty replacement may be the lasting fix.
Worn latches, sagging doors and a lock that no longer suits the door all lead to the same call. We assess the opening, then fit commercial hardware that holds up to your Vancouver traffic.
Hardware for business doors is graded by how hard it is used, with Grade 1 the heaviest duty. A busy restaurant entrance, an office suite and a storage door each call for something different, and a residential-style lock on a heavily used door will wear out. We look at the door, the frame, the latch function you need and any exit requirements before choosing between cylindrical, mortise or rim hardware.
Many Vancouver business doors are older than their locks. Character buildings along Main Street, Hastings and in Chinatown often have mortise lock bodies in thick wood doors, where replacing the cylinder or trim is simpler than cutting a new prep. Newer Olympic Village and Cambie retail units usually have aluminum and glass doors with narrow stiles, where the hardware must suit the frame.
Wet winters affect doors. Wooden doors swell and drag, and a latch that worked in summer may not meet the strike in January. We check whether the problem is the lock or the door itself, because swapping hardware on a door that has dropped on its hinges only masks the issue. Closers, hinges and strikes are looked at together, not one at a time.
Grade 1 is the heaviest commercial duty, Grade 2 suits light commercial use and Grade 3 is residential. The right grade and lock type depend on how the door is used.
Typical reasons people in Vancouver call about commercial lock installation.
A Commercial Drive cafe's entry lock jams during the morning rush. Wear in a light-duty lock is common on busy doors, and a heavier-duty replacement may be the lasting fix.
An old mortise body in a heritage door is failing. The mortise is often reused, so the lock inside is replaced while keeping the original holes and trim where possible.
A tenant moving into a Fairview office finds a residential-style knob on the suite door. Commercial hardware with proper keying and latch function suits the way the door is used.
A few details that make the first call quicker and the visit more accurate.
The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Vancouver and the nearby areas below. Call with the address and we will tell you when someone can be there.
A worn cylinder, a loose body or a latch that no longer meets the strike can often be repaired. A badly worn lock on a busy door, or one that is obsolete, may be better replaced. Diagnosis comes first so you do not pay for a part you do not need.
ANSI/BHMA grades rank commercial hardware by durability and strength, and Grade 1 is the heaviest duty. A high-traffic door such as a restaurant or clinic entrance is usually a candidate for it, while a rarely used storage door may not need it.
Often yes. Old doors may need a mortise lock or careful prep, and the frame has to hold the strike. We look at the door on site and explain what can be reused, so original holes and trim are preserved where practical.
Guides that go deeper on this kind of job.
Call with the address or send the details online. The phone is answered 24/7.