Skip to content
The Lock Doc

Panic Bar Installation in Richmond, BC

A panic bar has one job: letting people out quickly in an emergency. It has to match the door, and it must never be blocked or chained.

Request service

For immediate help, call +1 236 800 LOCK. Submitting this form does not confirm an appointment.

Panic bars and exit hardware in Richmond

Exit devices come in several forms: rim, surface vertical rod, concealed vertical rod and mortise. The right one depends on the door's size and material, whether it is fire-rated, how many people use it and what latch and closer are already in place. Exit hardware is life-safety equipment. We check the opening and install or replace the device to work dependably, and we never block an exit to meet a security goal.

Restaurants and event spaces near Richmond Centre and Lansdowne, plus warehouses and light-industrial units near Bridgeport, rely on exit doors that must open from the inside at any time. Rain can swell worn doors and stiffen older devices, making a bar that was easy to push in summer feel heavy in winter. Clear photos of both sides of the opening help us identify the device before a visit.

Four exit device types on door outlines: rim, surface vertical rod, concealed vertical rod and mortise, with the push bar in orange.
Exit devices differ in how they latch: at the edge, with rods at the top and bottom, or with a mortise case. Fire-rated doors have extra requirements.

How panic bar installation works

Exit devices differ in how they latch: at the edge, with rods at the top and bottom, or with a mortise case. Fire-rated doors have extra requirements.

Common situations in Richmond

Typical reasons people in Richmond call about panic bar installation.

A bar that sticks when pushed

A back-door exit device feels heavy and does not always release. We check the latch, alignment and mounting, then repair or replace the device before it becomes a safety problem.

Replacing a damaged exit device

After a forced entry, the bar on a rear door is bent. We identify the correct replacement for the door and rating, and fit it so the door releases smoothly.

Before you call

A few details that make the first call quicker and the visit more accurate.

  1. Photograph both sides of the door and the existing bar or latch.
  2. Note whether the door is fire-rated and any known occupancy information.
  3. Keep the exit path clear and never chain or block the door while waiting.

Where we work in Richmond

The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Richmond and the nearby areas below. Call with the address and we will tell you when someone can be there.

Map of Richmond neighbourhoods served: City Centre, Steveston, Terra Nova, Seafair, Broadmoor, Shellmont, East Cambie, Hamilton
Neighbourhoods across Richmond and the nearby areas we also cover: Vancouver, New Westminster, Surrey, Burnaby. Locations are approximate.

Panic Bar Installation questions in Richmond

Can any panic bar fit my door?

No. The device must suit the door size, material, rating and existing latch, and fire-rated doors have extra requirements. We check these on site and choose the matching device, rather than trying a bar that is only close.

Can I lock a panic bar from the outside?

Many devices can be locked on the outside while still letting people exit from the inside, depending on the model. We explain the options and make sure the inside release always works.

Need a locksmith in Richmond?

Call with the address or send the details online. The phone is answered 24/7.