A lock fails the week you move in
A front door lock in a Hammond house turns but will not retract the latch. After diagnosis, it is replaced with a compatible set that uses the existing holes.
A lock that has failed, a new door, or hardware you want to update: we assess the door, compare compatible locks and install one that fits cleanly and works smoothly.
Replacement is not automatic. Sound hardware may only need rekeying or a small repair, and the first visit decides which. When a new lock is the right answer, door prep matters: a standard 2-1/8 inch cross bore, a 1 inch edge bore and a 2-3/8 or 2-3/4 inch backset fit most modern sets. Older buildings can have mortise locks that need a different approach.
Haney and Port Haney have heritage and older houses where mortise locks and unusual door sizes still turn up. Newer homes in Albion and Silver Valley use standard preps, so replacements are quick and finishes can be matched to your handles. Townhouses near Town Centre may limit what you can change on a unit door, so check strata rules before you buy hardware.
Most residential locksets fit a 2-1/8 in. cross bore, a 1 in. edge bore and a 2-3/8 or 2-3/4 in. backset, on doors 1-3/8 to 1-3/4 in. thick.
Typical reasons people in Maple Ridge call about residential lock installation and replacement.
A front door lock in a Hammond house turns but will not retract the latch. After diagnosis, it is replaced with a compatible set that uses the existing holes.
You have repainted the door and want new matching handles. The technician measures the existing holes and installs a lockset in the finish you chose, reusing prep where possible.
A few details that make the first call quicker and the visit more accurate.
The Lock Doc is mobile: the technician comes to the home, business or vehicle anywhere in Maple Ridge and the nearby areas below. Call with the address and we will tell you when someone can be there.
Usually yes, because most doors use standard holes. Very old doors may have different sizes or mortise cutouts, so photos help. The technician checks the preparation on arrival and tells you if any extra work is needed.
If the lock is sound, rekeying is usually the better choice and keeps the hardware. We replace only when the lock is worn, damaged, obsolete or you simply want a different style or security level.
Guides that go deeper on this kind of job.
Call with the address or send the details online. The phone is answered 24/7.